Pool Restoration and Renovation in Wilton, CT

Gunite pool restoration, renovation, and resurfacing for existing pools. Replastering, retile, new coping, structural repair, and equipment and automation upgrades. We drain and inspect before any scope is written.

Why Gunite Pool Restoration in Wilton, CT

Wilton's 27 square miles of rolling, wooded hills sit across the Norwalk River watershed, and wetlands are widespread -- the Wilton Inland Wetlands Commission regulates construction activity within 100 feet of wetlands and watercourses, which catches many existing pool sites when renovation scope touches grading, decks, or drainage. Classic two-acre lots in Drum Hill, Belden Hill, and Cannondale carry mature pools from the 1990s that are prime replaster and equipment-upgrade candidates.

Our Pool Restoration and Renovation Process

  1. Assessment and drain-down. An empty shell tells the truth. We look at finish condition, cracking, steel exposure, hollow areas, tile and coping bond, plumbing, and the equipment pad.
  2. Scope and proposal. Written after the inspection, not before it, with a line for every item and a note on what we found.
  3. Permitting. Building Permit, P&Z review, and Inland Wetlands application where work falls within 100 feet of wetlands or watercourses, as required for Wilton.
  4. Structural repair. Shell work, plumbing, and any modification to the pool's shape or depth, all completed before anything decorative goes in.
  5. Finish. Waterline tile, coping, interior surface, lighting, and deck integration.
  6. Startup. Fill, water balance, equipment and automation commissioning, and an owner walkthrough.

Restoration, Renovation, Resurfacing, Remodeling: What Each Word Means

Homeowners use these words interchangeably, and so does most of the industry. Here is how we use them, so that a proposal reads back the same way you asked for it.

Resurfacing, refinishing, and replastering all describe the same category of work. The worn interior surface comes off and a new one goes on. The shell stays. Only the finish changes.

Renovation is broader. It takes in the finish plus everything around it: waterline tile, coping, the equipment pad, lighting, and the deck where it meets the pool.

Restoration is what we call it when a pool has been left long enough that the work has to start with repair rather than appearance. Steel showing through the finish, hollow areas behind the plaster, a shell that has moved. Restoration puts the structure right first and everything above it second.

Remodeling changes the pool itself: a new depth profile, a tanning ledge, a spa tied into the existing shell, a squared edge where a kidney shape used to be.

Most Wilton projects turn out to be some mix of the four. What matters is that the pool gets looked at before anyone names the job.

Signs a Wilton Pool Is Ready for Restoration

Gunite shells built in Wilton in the 1970s, 1980s, and 1990s are frequently sound. What sits on top of them is not. These are the conditions that bring owners to us:

None of these on their own means the pool is finished. Several of them together usually means the next owner of the problem should be a builder rather than a service company.

Frequently Asked Questions

What is the difference between pool restoration and pool renovation in Wilton?

Renovation replaces what has worn out: finish, tile, coping, equipment. Restoration starts a step earlier, with a shell that needs repair before any of that is worth doing. Most Wilton pools we are called to look at need some of both, and we do not know which until the water is out.

How much does pool restoration and resurfacing cost in Wilton?

Scope drives the number. Resurfacing with new waterline tile generally runs $40,000 to $70,000. A mid-level renovation adding coping, tile, plaster, and a rebuilt equipment pad typically runs $50,000 to $120,000. A full restoration with structural repair, new plumbing, automation, lighting, and finishes runs $120,000 to $250,000 and up. We write scope after we drain and look.

How long does gunite pool resurfacing last?

A quality exposed-aggregate or quartz interior finish should give 15 to 20 years in a Connecticut or Westchester climate. Plain white plaster is a shorter-lived product. What actually shortens a finish is water chemistry that runs out of balance for long stretches, and a shell that was never properly repaired underneath it.

Can you replaster and remodel a pool at the same time in Wilton?

Yes, and it is usually the economical way to do it. The pool is already drained and the deck is already open. Adding a tanning ledge, changing a depth profile, squaring off an edge, or tying in a spillover spa costs far less as part of a restoration than as its own project later.

Do you handle permits for pool restoration in Wilton, CT?

Yes. We act as your authorized agent for the filings the work requires. The owner signs an authorization letter and we handle the rest.

How long does a pool restoration take in Wilton?

A resurfacing-only project can run 1 to 2 weeks. A mid-level renovation with tile, coping, and equipment typically takes 4 to 8 weeks. A full restoration with structural work, new plumbing, automation, and finishes can take 8 to 14 weeks. Off-season scheduling keeps the pool available when you actually want it.

Swimming Pool Company in Wilton, CT

Gedney Pools LLC is the swimming pool company Wilton, CT owners hire when the project demands a custom gunite shell, precise engineering, and a builder who runs permitting, design, and construction under one point of supervision. We are a swimming pool contractor in Wilton, CT licensed under CT HIC #0704131 and CT SPB #SPB.0000169. Call (203) 302-9920 for a site evaluation.

Related Services in This Area

Ready to Start Your Pool Project in Wilton?

Call (203) 302-9920 or email info@gedneypools.com.