Pool Restoration and Renovation in Weston, CT

Gunite pool restoration, renovation, and resurfacing for existing pools. Replastering, retile, new coping, structural repair, and equipment and automation upgrades. We drain and inspect before any scope is written.

Why Gunite Pool Restoration in Weston, CT

Weston is defined by large-lot zoning across most of town and an unusually high water table of regulatory concern: numerous streams, ponds, and wetland areas -- including the Saugatuck Reservoir watershed in the northwestern section -- put many properties within Inland Wetlands jurisdiction. Pool setbacks generally call for 25 feet from property lines. Many Weston pools now due for renovation were built in the 1980s-2000s boom and are running original plaster and single-speed equipment.

Our Pool Restoration and Renovation Process

  1. Assessment and drain-down. An empty shell tells the truth. We look at finish condition, cracking, steel exposure, hollow areas, tile and coping bond, plumbing, and the equipment pad.
  2. Scope and proposal. Written after the inspection, not before it, with a line for every item and a note on what we found.
  3. Permitting. Building Permit, P&Z review, Inland Wetlands where buffers apply, and any HOA architectural review, as required for Weston.
  4. Structural repair. Shell work, plumbing, and any modification to the pool's shape or depth, all completed before anything decorative goes in.
  5. Finish. Waterline tile, coping, interior surface, lighting, and deck integration.
  6. Startup. Fill, water balance, equipment and automation commissioning, and an owner walkthrough.

Restoration, Renovation, Resurfacing, Remodeling: What Each Word Means

Homeowners use these words interchangeably, and so does most of the industry. Here is how we use them, so that a proposal reads back the same way you asked for it.

Resurfacing, refinishing, and replastering all describe the same category of work. The worn interior surface comes off and a new one goes on. The shell stays. Only the finish changes.

Renovation is broader. It takes in the finish plus everything around it: waterline tile, coping, the equipment pad, lighting, and the deck where it meets the pool.

Restoration is what we call it when a pool has been left long enough that the work has to start with repair rather than appearance. Steel showing through the finish, hollow areas behind the plaster, a shell that has moved. Restoration puts the structure right first and everything above it second.

Remodeling changes the pool itself: a new depth profile, a tanning ledge, a spa tied into the existing shell, a squared edge where a kidney shape used to be.

Most Weston projects turn out to be some mix of the four. What matters is that the pool gets looked at before anyone names the job.

Signs a Weston Pool Is Ready for Restoration

Gunite shells built in Weston in the 1970s, 1980s, and 1990s are frequently sound. What sits on top of them is not. These are the conditions that bring owners to us:

None of these on their own means the pool is finished. Several of them together usually means the next owner of the problem should be a builder rather than a service company.

Frequently Asked Questions

What is the difference between pool restoration and pool renovation in Weston?

Renovation replaces what has worn out: finish, tile, coping, equipment. Restoration starts a step earlier, with a shell that needs repair before any of that is worth doing. Most Weston pools we are called to look at need some of both, and we do not know which until the water is out.

How much does pool restoration and resurfacing cost in Weston?

Scope drives the number. Resurfacing with new waterline tile generally runs $40,000 to $70,000. A mid-level renovation adding coping, tile, plaster, and a rebuilt equipment pad typically runs $50,000 to $120,000. A full restoration with structural repair, new plumbing, automation, lighting, and finishes runs $120,000 to $250,000 and up. We write scope after we drain and look.

How long does gunite pool resurfacing last?

A quality exposed-aggregate or quartz interior finish should give 15 to 20 years in a Connecticut or Westchester climate. Plain white plaster is a shorter-lived product. What actually shortens a finish is water chemistry that runs out of balance for long stretches, and a shell that was never properly repaired underneath it.

Can you replaster and remodel a pool at the same time in Weston?

Yes, and it is usually the economical way to do it. The pool is already drained and the deck is already open. Adding a tanning ledge, changing a depth profile, squaring off an edge, or tying in a spillover spa costs far less as part of a restoration than as its own project later.

Do you handle permits for pool restoration in Weston, CT?

Yes. We act as your authorized agent for the filings the work requires. The owner signs an authorization letter and we handle the rest.

How long does a pool restoration take in Weston?

A resurfacing-only project can run 1 to 2 weeks. A mid-level renovation with tile, coping, and equipment typically takes 4 to 8 weeks. A full restoration with structural work, new plumbing, automation, and finishes can take 8 to 14 weeks. Off-season scheduling keeps the pool available when you actually want it.

Swimming Pool Company in Weston, CT

Gedney Pools LLC is the swimming pool company Weston, CT owners hire when the project demands a custom gunite shell, precise engineering, and a builder who runs permitting, design, and construction under one point of supervision. We are a swimming pool contractor in Weston, CT licensed under CT HIC #0704131 and CT SPB #SPB.0000169. Call (203) 302-9920 for a site evaluation.

Related Services in This Area

Ready to Start Your Pool Project in Weston?

Call (203) 302-9920 or email info@gedneypools.com.