
Protecting Your Backyard Legacy with Advanced Oxidation Technology
A custom gunite pool is a $200,000+ architectural asset. Its lifespan depends entirely on the invisible chemical environment within it.
Extreme winter freeze-thaw cycles test the limits of natural masonry and plaster. Structural durability demands absolute water chemistry perfection.
The Langelier Saturation Index (LSI) is the definitive measure of water balance. Unstable LSI causes plaster to pit, etch, or scale, reducing a 20-year finish to a 5-year liability.
Salt Chlorine Generators (SCGs) are widely popular for providing a soft water feel and automating chlorine production.
They are fundamentally incompatible with high-end gunite construction, premium natural stone, and automatic safety covers.
Saltwater systems continuously drive chemical instability and introduce harsh chlorides into porous materials, initiating a cycle of structural degradation.
A saltwater pool never rests at equilibrium - it swings perpetually between two damaging extremes.
Electrolysis splits salt (NaCl) into chlorine gas and Sodium Hydroxide (NaOH).
Sodium hydroxide is highly alkaline, continuously driving the pool's pH to extreme highs.
To prevent the pool finish from scaling (feeling like sandpaper), owners must dump large volumes of harsh muriatic acid to crash the pH back down.
This constant chemical whiplash destroys the LSI equilibrium, literally pulling calcium out of the gunite plaster and causing irreversible pitting, checking, and delamination.
Saltwater splashes onto the stone.
Water evaporates, leaving salt behind in the pores.
Salt recrystallizes and expands, cracking the stone.
Travertine, Limestone, and Bluestone (the staples of Northeast luxury decks) are highly susceptible to chloride intrusion.
Expanding salt crystals exert massive internal pressure, causing the stone to literally crumble and pit from the inside out.
Leaves a permanent, chalky white residue on premium decking.
Dissolves naturally occurring minerals within the stone, destroying its internal structural integrity.
Automatic safety covers are essential for heat retention and safety, but are highly sensitive to corrosive environments.
The persistent high chloride levels in saltwater pools actively corrode aluminum cover tracks, cables, and stainless-steel bracket mechanisms.
Results in catastrophic mechanical failures, cover jamming, and thousands of dollars in premature replacement costs.
AOP mimics the earth's atmosphere, where sunlight interacts with water vapor to create the ultimate air-purifying molecules.
AOP systems generate highly unstable, negatively charged molecules that act as the most powerful oxidizers available for water treatment.
After instantly destroying contaminants, hydroxyl radicals safely convert back into dissolved oxygen (O2) and water (H2O), leaving no chemical residues.
Hydroxyl radicals have the highest oxidation potential of any pool sanitation method.
Instantly destroys organic lipids, sweat, bacteria, viruses, and highly chlorine-resistant pathogens (like Cryptosporidium).
100% of the advanced oxidation work takes place entirely within the equipment pad plumbing - never in the pool itself.
Because hydroxyl radicals are so highly reactive, they last for only fractions of a second.
Intense oxidation never touches vulnerable tile, grout, stone coping, or plaster.
Zero chemical byproducts. Zero chloramines. Only pristine, polished water is returned to the swimming vessel.
Completely destroys chloramines (combined chlorine) - the byproducts associated with respiratory and skin irritation.
Leaves a pristine, silky, freshwater feel that will not dry out hair or cause eczema flare-ups. Red, stinging eyes are eliminated.
Allows the pool to operate safely at a microscopic 0.5 to 1.0 ppm chlorine residual (equivalent to standard municipal tap water).
Eliminates the "pool smell" entirely, allowing the backyard to smell like nature, not a public aquatic facility.
A high-capacity wet chamber reactor combining dissolved ozone gas (O3) with germicidal Ultraviolet (UV-C) light.
When the UV-C light hits the ozone within the chamber, it triggers a catalytic reaction, generating a dense, instantaneous cloud of hydroxyl radicals.
The UV-C light provides secondary sterilization by directly disrupting the DNA/RNA of pathogens passing through the chamber.
Venturi system pulls in ambient oxygen (O2).
Chamber converts O2 into highly reactive atomic oxygen (O1).
O1 is injected into the plumbing, reacting with H2O to form •OH.
No pool water ever enters the physical system unit, eliminating scaled quartz tubes and wet-chamber fouling.
Operates via a simple, 5-minute annual cartridge exchange.
Produces a steady stream of oxygen radicals without complex oxygen concentrators or desiccant air dryers.
Engineered for massive, custom water bodies, expansive vanishing edges, and high-flow water features.
The intense radical creation causes microscopic oils, lotions, and heavy metals to instantly clump together.
This micro-flocculation allows the pool's standard filtration system to easily trap microscopic debris, resulting in unprecedented, diamond-clear water visibility at depths of 10+ feet.
Diamond-clear visibility depth, achieved through micro-flocculation and standard filtration alone.
Replaces manual acid pouring with intelligent, micro-dosing automation.
Continuously measures ORP and pH, injecting precise, minute doses of acid only when required to maintain perfect LSI neutrality.
Water chemistry in perfect equilibrium
The ultimate safeguard for plaster pools, completely eliminating the extreme chemical fluctuations that cause scale build-up and plaster etching.
Delivers real-time water chemistry data and out-of-range notifications directly to the homeowner and Gedney service technicians.
Advanced AOP handles the heavy lifting of hyper-oxidation (destroying pathogens and organics in microseconds).
The Automated pH system simultaneously locks the LSI in place, preventing any architectural degradation.
Together, this ecosystem minimizes chlorine demand by up to 50%, completely eliminates salt-induced spalling, protects automatic covers from chloride corrosion, and supports a 20-year lifespan of premium gunite plaster.
Where each component sits in the hydraulic chain decides whether an AOP system performs for decades or quietly fails. Every Gedney equipment pad is plumbed to a strict internal sequencing standard, developed over years of installations and audited on every build.
Cover-equipped pools add a layer of hydraulic engineering most installers never account for. Our installation standard includes dedicated de-gas integration that protects the cover system and the finish alike.
Radical generation only happens inside a precise flow window. We calibrate every system to the pool's variable-speed hydraulics and isolate competing circuits so that window holds in every season. The specifications live in our installation standards, not on the internet.
At Gedney Pools, we believe a $200,000+ custom build deserves more than standard chemistry. By rejecting the corrosive realities of saltwater and embracing the pure science of Advanced Oxidation, we ensure your family swims in pristine, drinking-quality water - while permanently protecting the structural integrity of your backyard legacy.
Advanced oxidation systems create hydroxyl radicals -- at 2.80V, the strongest oxidizer used in water treatment -- inside the equipment-pad plumbing. Pathogens and organics are destroyed in under a microsecond, and the radicals convert to water and oxygen before the water returns to the pool.
Yes -- a low 0.5-1.0 ppm residual, the range used in municipal drinking water. The pool holds a fraction of conventional chlorine levels: odorless, soft water that is friendlier to sensitive skin.
On premium Northeast installations it carries real risks: pH swings that can etch plaster, salt recrystallization that spalls travertine and bluestone, and chloride attack on cover tracks and heaters.
Yes. AOP sanitation and automated pH regulation can be added at the equipment pad during a renovation or equipment upgrade, and every new Gedney build can be specified with the full water care suite.
Yes. Continuous ORP sanitizer sensing, self-limiting CO2 pH control, and live saturation-index defense are delivered in three engineered tiers -- see Computerized Water Chemistry Monitoring for the full program.
Call (203) 302-9920, email info@gedneypools.com, or request a consultation to specify Gedney Premium Water Care on your new build or renovation.
Gedney Pools LLC • Darien, CT 06820 • CT HIC #0704131 | CT SPB #SPB.0000169 • Verify at elicense.ct.gov